KLCC.Tower.Lift.Glitch

How many times have you got onto a lift in KLCC Tower 2 but only to find that it won't stop at your floor despite you went into the correct lift? (When that happens, never EVER go into the stairwells!) The reason for this is because the KLCC lifts are double-deckers with the bottom deck serving even floors and the upper deck serving odd floors.

But how do you expect infrequent visitors to know? Here's a glitch I discovered with the lifts that will allow you to travel to any of the odd and even floors within the lift's floor range.

Supposed you want to get to the 29th floor for example to attend the MIND usergroup gathering (which is held once a month on a Saturday) and like most people, you will naturally go to the lifts at the ground floor, which in this instance, will take you to even floors only.

1. Board any of the lifts that will be servicing the floor range. i.e. (23 - 36)
2. If there is no one with you who are going to other floors, select a floor other than yours (usually select one floor below), otherwise, skip this step.
3. When the lift door opens (which isn't on your floor), press the <> button (Open) and quickly scout for the location of the up and down buttons outside the lift. It's either on the left or right side when you exit the lift.
4. Exit the lift (you don't have to run) and quickly press the UP button
5. By now the lift doors will start to close but because you pressed the UP button, it will open again.
6. Get back into the lift and press your desired floor number.
7. The lift will then service your floor.